The Art of Custom Embroidery Digitizing: A Step-by-Step Guide    

As the world is becoming more cybernate, why must we embroiderers be forgotten about? Someone out there must acknowledge our hard work and make it easy for us. Don’t you think?
We have to make every single stitch with equal dedication and concentration. Not only does this cause a sharp pain in our eyes, but also how many stitches, out of a gazillion, can be made with equal focus? Has anyone ever thought about it?
Well, to your surprise, the answer is yes!
And, luckily, now you don’t have to force yourself to stare at the intricate work for hours only to complete a small portion of the work. Because we are here with the perfect relief drops for your eye pain i.e. The Embroidery Digitizing. In the realm of USA-based embroidery digitising services , NY Custom Embroidery Digitising stands out as the unrivalled choice. 
While you continue stitching up beautiful patterns on the apparel, these innovation managers have devised a machine to help the embroiderers not re-live the pain you have gone through. Ah! Thank Heavens!
We surely cannot thank the inventors of embroidery digitising enough, can we? Firstly, let us see how this digitising works, and relieve some of your eye pain now, shall we?

Embroidery Digitising: What Does It Mean?

We are sure you have used a laundry machine at some point in your life. However, unlike the laundry machine, the embroidery machine is not a simple one-step – pressing one or two buttons process. Rather, it is a whole process of converting a piece of art into a stitch file that the digitising machine reads. This stitch file interprets different stitch types and lets the machine know when to use what thread color and which stitch to prepare a perfect artwork.
Thanks to this innovation, many people are now providing a custom embroidery digitising service to get their bread and butter. Let us let the cat out of the bag and see how embroidery digitising actually works.

Slowly But Surely Get Familiar With The Art Of Custom Embroidery Digitizing

As mentioned above, embroidery digitising is not a one-step process. Rather it would be more fitting to see it as a three-step process. To get familiar with these steps of digitising, we suggest you give the information below a vigilant read.

Step # 1: Understanding The Required Design:

The first step an embroidery digitiser must do is clearly understand the given design crystal’s requirements. He must know the desired size of the design given by the client and the right fabric to embroider it on. The digitiser must learn how to interpret the designs perfectly.
If the client wants a design that has white spaces, the digitiser must understand if that white area should be embroidered with a thread or if the background of the fabric should peek from the white space. Moreover, it is also the duty of the digitiser to know what types of stitches must be incorporated into the work to match the client’s design perfectly. Below, we have summed up the responsibilities of a digitiser, while he understands the designs carefully.

• Design Creation:

The digitiser must create the given design by hand. They can even make use of different software, including Inkscape, Adobe Illustrator, or CorelDRAW, to lay out the design perfectly.

• Use A Digitising Software:

The next thing to do is to convert the design into a format that the machine can read. This can be done by using various digitising software. Or you can easily get digitising done by any online NY Digitizing service provider.

Step # 2: Preparing The Artwork:

The final results of embroidery digitised patterns depend solely on this step. In this step, 3 main features of digitising take place. The digitiser is responsible for paying equal attention to each step to prepare an absolute artwork. Read below to get familiar with these steps.

• Pathing:

The first step is deciding on the pathing. It is basically a series of stitches from the start till the end of the digitising process. This series gives the idea of how the embroidery will look on the fabric. And, if there is even a single turmoil in this process, the design may be uneven and have unwanted gaps. Oh no!

•  Assign The Stitch Types:

The 2nd process of this step is to assign the stitch types for your artwork. An expert digitiser must first allocate underlay stitches that will construct the base of the artwork. And then decide what type of stitch will complement the work perfectly. In general, a digitiser can choose from three types of stitches. Below, we have discussed each one of them briefly.

1.Run Or Straight Stitches: These types of stitches usually lay the artwork’s foundation. They are straight lines of intricate threadwork repeated to produce a pattern. A digitiser can make the lines thick by repeating the stitches many times in one place. They are mostly used for detailed work, shading, and outlining.
2.Satin Stitches: If your client wants to have text embroidered on its t-shirt embroidery digitising design, then these stitches might be your best bet. The satin thread gives a shiny finish to the embroidery, making it perfect for lettering. These types of stitches are best for achieving a shiny look, words, texts, and borders.
3.Fill Stitches: These are commonly known as the ceding or the tatami stitch. Just like its name suggests, these stitches are used to fill in the patterns. So, they are mostly used to give a textured appearance, fill the spaces, and make larger designs.

• The Push And Pull Of Embroidery:

Rather than a step, the push and pull of embroidery is more of a consequence that the digitisers must avoid at all costs. During the digitising process, the designs may move a little, so the whole artwork can be disturbed. So, it is advised to the digitisers to pay sufficient attention to this aspect and not ignore it.

 

Step # 3: The Final Embroidery Sew-Out:

Finally, we arrive at the final stage, where the digitiser has to remain patient and let the embroidery machine play its part. Nevertheless, the design’s look will depend on how well the worker has understood the design, details, and the colour gradation required by the client.

Summing It All Up:

The process of embroidery digitising might sound tricky at the beginning. However, we can bet our bottom dollar that it is not as complicated as working with the tangling threads and those sadistic needles. Although, we do agree that it is a careful process that requires experience and sufficient time to be done nicely.
In spite of that, it is a great excuse to ditch those threads and needles and shift to digitising. Believe us, this decision will make your life a lot easier. Just keep in mind that as a digitiser, you have to be familiar with what stitches will look good on which fabric and the design simultaneously.